Global (EN)
Global (EN)
A Vapor Recovery Unit (VRU) is an engineered compression package, which aims to lower emissions levels coming from the vapors of gasoline or other fuels while recovering valuable hydrocarbons to be sold or reused as fuel onsite. A package for vapor recovery is designed to capture about 95% of Btu-rich vapors, generating many benefits, guaranteeing less air pollution, and recovering gasoline vapors to be used as fuel.
When crude oil is stored in storage tanks, the vapor space above the liquid will become saturated with VOCs to reach equilibrium. Changing liquid levels due to loading and unloading of the tank will cause changes in the vapor space.
As the tank is unloaded (drained) vapor must be added into the tank above the liquid to maintain a slightly positive pressure inside the tank to keep it from collapsing as the liquid is evacuated. As the tank is loaded (filled) the vapor above the liquid must be removed to keep the tank from over pressuring and potentially rupturing.
Ambient temperature changes can also change the vapor pressure inside the tank above the liquid and can lead to the venting of the VOC saturated vapor to the atmosphere or allow to air ingress into the tank, if the tank is rapidly cooled, forming a potentially explosive atmosphere inside the tank. The VOC containing vapor that is vented through boil-off (hot ambient days) or through loading operations can be recovered and compressed.
The gas (1) coming from the tank farms entersthe Liquid Ring Compressor (2) along with the process water (3).
After thecompression phase, the gas, water and hydrocarbon mixture enters the separator(4) where the three elements are parted: the gas passes through a demister (5)to remove water droplets and leaves the vessel from the top, whilecondensed hydrocarbons and water are separated from the vapor stream by gravitydue to reduced gas speed.
The water is sent back to the compressor, afterbeing cooled by a cooler (6). Moreover, continuous process water make up line(7) in the compressor, suction is provided to ensure a continuous water ring inthe compressor. The condensed hydrocarbons are discarded or put back into thetanks (8). The gas exiting the separator finally heads to the Gas GatheringSystem (9).
The most commonly used compressors (rotary and mechanical) used for VRUs include:
Garo Vapor Recovery Units are built around the liquid ring compressor, which compresses the gases using a seal liquid. The process liquid is fed into the machine and, by centrifugal acceleration, forms a moving cylindrical ring, which takes the shape of the double-lobe eccentric casing.
This liquid ring creates a series of seals in the space between the impeller vanes forming the compression chamber. The gas is fed into the machine by a distribution cone and it is compressed by the rotation of the impeller inside the seal liquid.
Liquid ring gas compressors have been used successfully in vapor recovery systems for more than a decade. There are distinct advantages of using Garo liquid ring compression for vapor recovery. The compression occurs inside a liquid bath (typically water), making the compression cycle intrinsically safe.
The liquid bath also absorbs the majority of the heat generated by compression, actively cooling the gas vapors during the compression cycle. The seal liquid is also cooled to remove heat and maintain near isothermal compression within the system.The liquid bath is also effective at removing fine particulate matter entrained in the vapor stream. Garo liquid ring compressors can also withstand some small amount of free liquids in the incoming gas stream, potentially removing the need for a suction knock-out.
Yes, there are two completely different pieces of engineered equipment for different applications that are both referred to as Vapor Recovery Units.
The main difference between a mechanical Vapor Recovery Unit (VRU) and a carbon bed or adsorption type VRU lies in their operational principles and applications:
Mechanical VRU: A mechanical VRU is primarily designed for recovering tank vapors, which are gases formed when the liquid in a storage tank is heated by external temperatures and collects in the space at the top of the tank. The process involves compressing these tank vapors and then routing them to a pipeline that delivers the gas to another part of the facility or a sales pipeline. The key features of a mechanical VRU include:
Carbon Bed or Adsorption Type VRU: On the other hand, a carbon bed or adsorption type VRU functions as a large filtration system. It is typically used to manage vapors that are generated during the loading of trucks, railcars, marine vessels, or tanks. Vapor is directed to the VRU, where it passes through a bed of activated carbon. The carbon bed adsorbs hydrocarbons from the vapor, allowing clean air to exit the system. When the carbon bed becomes saturated with hydrocarbons, a vacuum pump is used to extract these vapors, sending them to an absorber tower. In the absorber tower, the hydrocarbons are returned to a liquid state, making them suitable for reintegration into the tanks. The key features of a carbon bed or adsorption type VRU include:
In summary, mechanical VRUs are mainly employed to recover tank vapors through compression, while carbon bed or adsorption type VRUs focus on capturing and processing vapors released during the loading and unloading of liquids using activated carbon beds and subsequent vapor conversion. The choice between these VRU types depends on the specific needs and processes of the facility, as they cater to different aspects of vapor recovery and emission control.
